Can I enter a height in feet and inches?
Yes. The height converter accepts feet and inches or centimeters. It normalizes inches into feet and reports the equivalent centimeters.
Measurement Converters
Convert mixed feet and inches, fractional inches, running pace, data transfer rates, or volume flow. Each tool shows its formula, a worked example, answers to common questions, and links to unit references.
Choose a measurement converter
Example results
These examples use the same factors and display precision as the converters.
| Enter | Result | Converter |
|---|---|---|
| 175.26 cm | 5 ft 9 in | Height Converter: Centimeters to Feet and Inches |
| 1 3/8 in | 34.925 mm | Fractional Inches Converter |
| 5:00 min/km | 12 km/h | Running Pace Converter |
| 100 Mbps | 12.5 MB/s | Data Transfer Rate Converter |
| 1 U.S. gal/min | 3.785411784 L/min | Volume Flow Rate Converter |
Browse unit categories
For other unit conversions, browse length, speed, data storage, or volume.
Measurement conversion questions
How do exact conversions differ from rounded results?
An exact factor defines the relationship between units, such as 1 inch = 25.4 mm. The converter rounds displayed decimals for readability. The fractional inches converter labels a nearest fraction as approximate when rounding changes the value.
Why do bit and byte rate symbols use different capitalization?
Lowercase b means bit and uppercase B means byte. One byte is eight bits, so 100 Mbps converts to 12.5 MB/s using decimal prefixes.
Does the flow converter treat U.S. and imperial gallons as equal?
No. One U.S. gallon is 3.785411784 liters; one imperial gallon is 4.54609 liters. Select the matching gallon unit for your measurement.
How do I enter a pace with seconds?
Enter minutes and seconds as mm:ss, such as 5:00 for five minutes per kilometer or mile. Seconds must range from 00 through 59.
Do I need an account to use a converter?
Enter a value to see the result without an account. Each page also lists its formula, example, and unit sources.
Unit references
NIST references document the unit definitions used in these converters. Read about the calculation approach on the conversion methodology page.